High Banks Series Capacitor Bank Station
The High Banks Series Capacitor Bank Station was a project to support adding additional generation to an existing transmission line. The intent of this project[…]
Irish Creek Substation Line Addition
The Irish Creek Line Addition project was a brownfield project I was a design engineer on. The intent of this project was to add a[…]
Shamrock Wind Substation
The Shamrock Wind Project is a renewable project I was a design engineer on. It is in the ERCOT region and totals approximately 225 MW[…]
Waco Solar Substation
The Waco Solar Project is a renewable project I was a design engineer on. It connects approximately 400 MW of generation. My role in the[…]
Young Wind Substation
The Young Wind Project is a renewable project I was a design engineer on. It is in the ERCOT region and totals approximately 560 MW[…]
Lacy Creek Wind Substation
The Lacy Creek Wind Project was a renewable project I was a design engineer on. It connected 108 GE turbines in the ERCOT region, and[…]
Little Blue Wind Substation
The Little Blue Wind Project was a renewable project I was a design engineer on. It connected 100 turbines in the SPP region, and totaled[…]
White Mesa Wind Substation
The White Mesa Wind Project was a renewable project I was a design engineer on. It connected 180 GE turbines in the ERCOT region, and[…]
Analytics GUI for Sensor R&D
The analytics GUI is a data processing, visualization, and management tool used to research new sensor applications and troubleshoot machine train issues due to new[…]
GE 3500 / 60M100 HASS Backplane
The 3500/60M100 HASS Backplane is a six layer, multipurpose board. It provides HASS testing capability for the 3500 and 60M100 product lines without the need[…]
GE Aras Power Supply Test Fixture
The GE Aras Power Supply Test Fixture is designed to test both power supplies and Power Input Modules (PIM). This is achieved by using power[…]
GE Scout KPH External Trigger Prototype
The Scout 100 and 140 can provide multiple Manual KPH (Keyphasor) Thresholds. These are nominally configured as: +3V, -3V, -8V, -13V, and -18V. It is[…]
GE MEMS Accelerometer “NTI”
This project explorers the ability to use Microelectromechanical Systems (MEMS) type accelerometers as a viable replacement for moving coil seismic transducers and/or piezoelectric accelerometers in[…]
Geoforce 4-20mA XDCR to Globalstar Interface
The purpose of this project is to interface an industry standard 4-20mA transducer to a remote server by sending simplex transmissions via the Globalstar satellite[…]