High Banks Series Capacitor Bank Station
The High Banks Series Capacitor Bank Station was a project to support adding additional generation to an existing transmission line. The intent of this project[…]
Irish Creek Substation Line Addition
The Irish Creek Line Addition project was a brownfield project I was a design engineer on. The intent of this project was to add a[…]
Shamrock Wind Substation
The Shamrock Wind Project is a renewable project I was a design engineer on. It is in the ERCOT region and totals approximately 225 MW[…]
Waco Solar Substation
The Waco Solar Project is a renewable project I was a design engineer on. It connects approximately 400 MW of generation. My role in the[…]
Op Amps: Common Circuits (Part 2)
This post covers the other most commonly used op amp circuits. Basic math functions such as addition and subtraction can accomplished with op amps. Basic[…]
Op Amps: Common Circuits (Part 1)
Why use an operational amplifier? This post will demonstrate voltage follower, comparator, and amplifier circuits and provide the governing equations. For ease of understanding the[…]
Op Amps: The Practical Model
This post covers part two of The Guide to Practical Operational Amplifiers. The topic for this post is a model covering how op amps operate[…]
Op Amps: Choosing and Reading Datasheets
This Guide to Practical Operational Amplifiers was written for a corporate R&D audience based on prior training I received, research I have performed into op[…]
Young Wind Substation
The Young Wind Project is a renewable project I was a design engineer on. It is in the ERCOT region and totals approximately 560 MW[…]
Lacy Creek Wind Substation
The Lacy Creek Wind Project was a renewable project I was a design engineer on. It connected 108 GE turbines in the ERCOT region, and[…]
Little Blue Wind Substation
The Little Blue Wind Project was a renewable project I was a design engineer on. It connected 100 turbines in the SPP region, and totaled[…]
White Mesa Wind Substation
The White Mesa Wind Project was a renewable project I was a design engineer on. It connected 180 GE turbines in the ERCOT region, and[…]
Analytics GUI for Sensor R&D
The analytics GUI is a data processing, visualization, and management tool used to research new sensor applications and troubleshoot machine train issues due to new[…]
GE 3500 / 60M100 HASS Backplane
The 3500/60M100 HASS Backplane is a six layer, multipurpose board. It provides HASS testing capability for the 3500 and 60M100 product lines without the need[…]
GE Aras Power Supply Test Fixture
The GE Aras Power Supply Test Fixture is designed to test both power supplies and Power Input Modules (PIM). This is achieved by using power[…]